Hi everyone, I was following the Video Modernize PCI and SCSI drivers with DriverKit and the Document to implement UserMapHBAData(), and here’s my current implementation: // kern_return_t DRV_MAIN_CLASS_NAME::UserMapHBAData_Impl(uint32_t *uniqueTaskID) kern_return_t IMPL(DRV_MAIN_CLASS_NAME, UserMapHBAData) { Log("UserMapHBAData() - Start"); // Define the vm_page_size explicitly const uint32_t vm_page_size = 4096; kern_return_t ret; IOBufferMemoryDescriptor *buffer = nullptr; IOMemoryMap *memMap = nullptr; void *taskData = nullptr; // Create a buffer for HBA-specific task data ret = IOBufferMemoryDescriptor::Create(kIOMemoryDirectionOutIn, ivars->fTaskDataSize, vm_page_size, &buffer); __Require((kIOReturnSuccess == ret), Exit); // Map memory to the driver extension's memory space ret = buffer->CreateMapping(0, 0, 0, 0, 0, &memMap); __Require((kIOReturnSuccess == ret), Exit); // Retrieve mapped memory address taskData = reinterpret_cast<void *>(memMap->GetAddress()); __Require(taskData, Exit); // WARNING: Potential leak of an object stored into 'buffer' // WARNING: Potential leak of an object stored into 'memMap' // Assign a unique task ID ivars->fTaskID++; // ERROR: No member named 'fTaskID' in 'DriverKitAcxxx_IVars' ivars->fTaskArray[ivars->fTaskID] = taskData; *uniqueTaskID = ivars->fTaskID; Log("UserMapHBAData() - End"); return kIOReturnSuccess; Exit: // Cleanup in case of failure if (memMap) { memMap->free(); // Correct method for releasing memory maps } if (buffer) { buffer->free(); // Correct method for releasing buffer memory } LogErr("ret = 0x%0x", ret); Log("UserMapHBAData() - End"); return ret; } For reference, in KEXT, memory allocation is typically done using: IOBufferMemoryDescriptor *buffer = IOBufferMemoryDescriptor::inTaskWithOptions( kernel_task, // Task in which memory is allocated kIODirectionOutIn, // Direction (read/write) 1024, // Size of the buffer in bytes 4); // Alignment requirements However, after installing the dext, macOS hangs, and I have to do a hardware reset. After rebooting, the sysctl list output shows: % sectl list 1 extension(s) --- com.apple.system_extension.driver_extension enabled active teamID bundleID (version) name [state] * - com.accusys.DriverKitAcxxx (5.0/11) com.accusys.DriverKitAcxxx [activated waiting for user] Questions: What could be causing macOS to halt? How should I approach debugging and resolving this issue? Looking forward to your insights, any suggestions would be greatly appreciated! Best regards, Charles

Hello everyone, I’m working on implementing hardware interrupt handling in DriverKit and came across the InterruptOccurred method in IOInterruptDispatchSource. I noticed that its declaration ends with a TYPE macro: virtual void InterruptOccurred(OSAction* action, uint64_t count, uint64_t time) TYPE(IOInterruptDispatchSource::InterruptOccurred); This structure seems similar to how Timer Events are set up, where an event is linked to a callback and triggered by a timer. I’m attempting to use a similar approach, but for hardware-triggered interrupts rather than timer events. I’m currently in the trial-and-error phase of the implementation, but if anyone has a working example or reference on how to properly implement and register InterruptOccurred, it would be greatly appreciated! Best regards, Charles

Hello Everyone, I'm encountering an issue while setting up a timer event in DriverKit and would appreciate any guidance. Here's my current implementation: void DRV_MAIN_CLASS_NAME::SetupEventTimer() { // 1. Create dispatch queue kern_return_t ret = IODispatchQueue::Create("TimerQueue", 0, 0, &ivars->dispatchQueue); if (ret != kIOReturnSuccess) { LogErr("Failed to create dispatch queue: 0x%x", ret); return; } // 2. Create timer source ret = IOTimerDispatchSource::Create(ivars->dispatchQueue, &ivars->dispatchSource); if (ret != kIOReturnSuccess) { LogErr("Failed to create timer: 0x%x", ret); OSSafeReleaseNULL(ivars->dispatchQueue); return; } /*! * @brief Create an instance of OSAction. * @discussion Methods to allocate an OSAction instance are generated for each method defined in a class with * a TYPE attribute, so there should not be any need to directly call OSAction::Create(). * @param target OSObject to receive the callback. This object will be retained until the OSAction is * canceled or freed. * @param targetmsgid Generated message ID for the target method. * @param msgid Generated message ID for the method invoked by the receiver of the OSAction * to generate the callback. * @param referenceSize Size of additional state structure available to the creator of the OSAction * with GetReference. * @param action Created OSAction with +1 retain count to be released by the caller. * @return kIOReturnSuccess on success. See IOReturn.h for error codes. */ // 3: Create an OSAction for the TimerOccurred method // THIS IS WHERE I NEED HELP OSAction* timerAction = nullptr; ret = OSAction::Create(this, 0, 0, 0, &timerAction); if (ret != kIOReturnSuccess) { LogErr("Failed to create OSAction: 0x%x", ret); goto cleanup; } // 4. Set handler ret = ivars->dispatchSource->SetHandler(timerAction); if (ret != kIOReturnSuccess) { LogErr("Failed to set handler: 0x%x", ret); goto cleanup; } // 5. Schedule timer (1 second) uint64_t deadline = mach_absolute_time() + NSEC_PER_SEC; ivars->dispatchSource->WakeAtTime(0, deadline, 0); cleanup: if (ret != kIOReturnSuccess) { OSSafeReleaseNULL(timerAction); OSSafeReleaseNULL(ivars->dispatchSource); OSSafeReleaseNULL(ivars->dispatchQueue); } } Problem: The code runs but the OSAction callback binding seems incorrect (Step 3). According to the OSAction documentation, I need to use the TYPE macro to properly bind the callback method. But I try to use TYPE(DRV_MAIN_CLASS_NAME::TimerOccurred) kern_return_t TimerOccurred() LOCALONLY; TYPE(TimerOccurred) kern_return_t TimerOccurred() LOCALONLY; kern_return_t TimerOccurred() TYPE(DRV_MAIN_CLASS_NAME::TimerOccurred) LOCALONLY; All results in Out-of-line definition of 'TimerOccurred' does not match any declaration in 'DRV_MAIN_CLASS_NAME' Questions: What is the correct way to declare a timer callback method using TYPE? How to get the values targetmsgid & msgid generated by Xcode? Any help would be greatly appreciated! Best Regards, Charles

Hello Everyone, I am trying to create a Fake SCSI target based on SCSIControllerDriverKit.framework and inherent from IOUserSCSIParallelInterfaceController, here is the code kern_return_t IMPL(DRV_MAIN_CLASS_NAME, Start) { ... // Programmatically create a null SCSI Target SCSIDeviceIdentifier nullTargetID = 0; // Example target ID, adjust as needed ret = UserCreateTargetForID(nullTargetID, nullptr); if (ret != kIOReturnSuccess) { Log("Failed to create Null SCSI Target for ID %llu", nullTargetID); return ret; } ... } According the document UserCreateTargetForID, after creating a TargetID successfully, the framework will call the UserInitializeTargetForID() The document said: As part of the UserCreateTargetForID call, the kernel calls several APIs like UserInitializeTargetForID which run on the default dispatch queue of the dext. But after UserCreateTargetForID created, why the UserInitializeTargetForID() not be invoked automatically? Here is the part of log show init() - Start init() - End Start() - Start Start() - try 1 times UserCreateTargetForID() - Start Allocating resources for Target ID 0 UserCreateTargetForID() - End Start() - Finished. UserInitializeController() - Start - PCI vendorID: 0x14d6, deviceID: 0x626f. - BAR0: 0x1, BAR1: 0x200004. - GetBARInfo() - BAR1 - MemoryIndex: 0, Size: 262144, Type: 0. UserInitializeController() - End UserStartController() - Start - msiInterruptIndex : 0x00000000 - interruptType info is 0x00010000 - PCI Dext interrupt final value, return status info is 0x00000000 UserStartController() - End Any assistance would be greatly appreciated! Thank you in advance for your support. Best regards, Charles

Hello Everyone, I am trying to develop a DriverKit for RAID system, using PCIDriverKit & SCSIControllerDriverKit framework. The driver can detect the Vendor ID and Device ID. But before communicating to the RAID system, I would like to simulate a virtual Volume using a memory block to talk with macOS. In the UserInitializeController(), I allocated a 512K memory for a IOBufferMemoryDescriptor* volumeBuffer, but fail to use Map() to map memory for volumeBuffer. result = ivars->volumeBuffer->Map( 0, // Options: Use default 0, // Offset: Start of the buffer ivars->volumeSize, // Length: Must not exceed buffer size 0, // Flags: Use default nullptr, // Address space: Default address space &mappedAddress // Output parameter ); Log("Memory mapped completed at address: 0x%llx", mappedAddress); // this line never run The Log for Map completed never run, just restart to run the Start() and makes this Driver re-run again and again, in the end, the driver eat out macOS's memory and system halt. Are the parameters for Map() error? or I should not put this code in UserInitializeController()? Any help is appreciated! Thanks in advance. Charles

Hi Everybody, Follow Communicating between a DriverKit extension and a client app to migrate our kext to dext. The dext might have been loaded successfully by using the command systemextensionsctl list, the dext is loaded and enabled. % sectl list 1 extension(s) --- com.apple.system_extension.driver_extension enabled active teamID bundleID (version) name [state] * * K3TDMD9Y6B com.accusys.scsidriver (1.0/1) com.accusys.scsidriver [activated enabled] We try to use the CppUserClient.cpp to communicate with the dext, but can not get the dext service. The debug message as below: Failed opening service with error: 0xe00002c7. Here is the part of CppUserClient.cpp static const char* dextIdentifier = "com.accusys.scsidriver"; kern_return_t ret = kIOReturnSuccess; io_iterator_t iterator = IO_OBJECT_NULL; io_service_t service = IO_OBJECT_NULL; ret = IOServiceGetMatchingServices(kIOMasterPortDefault, IOServiceMatching("IOUserServer"), &iterator); printf("dextIdentifier = %s\n", dextIdentifier); printf("IOServiceNameMatching return = %d\n", ret); if (ret != kIOReturnSuccess) { printf("Unable to find service for identifier with error: 0x%08x.\n", ret); PrintErrorDetails(ret); } printf("Searching for dext service...\n"); while ((service = IOIteratorNext(iterator)) != IO_OBJECT_NULL) { // Open a connection to this user client as a server to that client, and store the instance in "service" ret = IOServiceOpen(service, mach_task_self_, kIOHIDServerConnectType, &connection); if (ret == kIOReturnSuccess) { printf("\tOpened service.\n"); break; } else { printf("\tFailed opening service with error: 0x%08x.\n", ret); } IOObjectRelease(service); } IOObjectRelease(iterator); if (service == IO_OBJECT_NULL) { printf("Failed to match to device.\n"); return EXIT_FAILURE; } The console output message is dextIdentifier = com.accusys.scsidriver IOServiceNameMatching return = 0 Searching for dext service... Failed opening service with error: 0xe00002c7. Failed opening service with error: 0xe00002c7. Failed opening service with error: 0xe00002c7. Failed opening service with error: 0xe00002c7. Failed to match to device. Here is the log show message fredapp start UserInitializeController pcitest: fredapp pci vendorID: 14d6 deviceID: 626f fredapp nnnnnew configuaration read32 0x10 info: 1 fredapp nnnnnew configuaration read32 0x14 info: 80100004 fredapp new 128 before enable busmaster ReqMSGport_info 0x00000040 : fffff pcitest: fredapp 131 pci ConfigurationRead16 busmaster value 0 pcitest: fredapp 134 Enable BusMaster and IO space done...... locate 139 fredapp MemoryWrite32 function done...... fredapp new 143 after enable busmaster ReqMSGport_info 0x00000040 : 0 fredapp newwww before GetBARInfo memoryIndex1 info is: 5 fredapp GetBARInfo 1 kernel return status is: 0 fredapp GetBARInfo memoryIndex1 info is: 0 fredapp GetBARInfo barSize1 info is: 262144 fredapp GetBARInfo barType1 info is: 0 fredapp GetBARInfo result0 info is: 3758097136 fredapp GetBARInfo memoryIndex0 info is: 0 fredapp GetBARInfo barSize0 info is: 0 fredapp GetBARInfo barType0 info is: 0 pcitest: newwww fredapp againnnn test ReqMSGport info: 8 fredapp Start MPIO_Init_Prepare fredapp end MPIO_Init_Prepare. fredapp call 741 Total_memory_size: 1bb900 fredapp Start MemoryAllocationForAME_Module. fredapp IOBufferMemoryDescriptor create return status info is kIOReturnSuc fredapp IOBufferMemoryDescriptor virtualAddressSegment address info: 0x1 fredapp virtualAddressSegment length info: 0x00080000 fredapp end IOBufferMemoryDescriptor Create. fredapp dmaSpecification maxAddressBits: 0x00000000 fredapp dmaSpecification maxAddressBits: 0x00000027 fredapp IODMACommand create return status info is kIOReturnSuccess fredapp end IODMACommand Create. fredapp PrepareForDMA return status info is kIOReturnSuccess fredapp PrepareForDMA return status info is 0x00000000 fredapp Allocate memory PrepareforDMA return flags info: 0x00000003 fredapp Allocate memory PrepareforDMA return segmentsCount info: 0x00000 fredapp Allocate memory PrepareforDMA return physicalAddressSegment info: fredapp IOBufferMemoryDescriptor virtualAddressSegment address info-2: 0 fredapp verify data success init() - Finished. fredapp start UserGetDMASpecification fredapp end UserGetDMASpecification fredapp start UserMapHBAData fredapp end UserMapHBAData fredapp start UserStartController fredapp interruptType info is 0x00010000 fredapp PCI Dext interrupt final value return status info is 0x00000000 Any suggestions? Best Regards, Charles