After upgrading to iOS system 26, the local name broadcast type is 08, but before upgrading, it is 09 and will be included in the scan resp message; In version 26, the scan resp will also include Manufacturer Specific Data. Before the upgrade, the broadcast message may not necessarily include Manufacturer Specific Data; What I want to ask is, are there any restrictions on Bluetooth broadcasting in version 26? Is it necessary to include Manufacturer Specific Data data? If Manufacturer Specific Data data is included, it may cause fields in the local name broadcast to be truncated and use simple names of type 08

We are currently facing an issue with implementing "Sign in with Apple" in our iOS application built using Flutter. We've implemented "Sign in with Apple" using Firebase and On attempting to sign in, we are encountering the following error: “Sign-up not completed.” We have verified that: The Apple Sign is enabled on our Firebase Project. The Sign in with Apple capability is enabled in the Xcode project. The Apple Sign-In capability is enabled for the App ID on our Apple Developer account. All the certificates were re-provisioned after enabling the capability. The Bundle ID matches across Apple Developer portal and our app configuration. The email and fullName scopes are requested in the credential. Please let us know if you require any additional information. We’re happy to provide whatever is needed. Here's a screenshot attached to explain the problem better

Hello, I currently have an Apple Developer account, Right now, I’m unable to renew my membership, and I cannot find the renewal or payment button. Please assist me and let me know the reason.

I am writing to report a significant battery drain issue after updating my Apple Watch SE (2nd generation) to watchOS 26.0 beta. Since the update, my watch’s battery life has drastically decreased: it goes from 100% to 0% in just 6 hours, whereas previously, under my typical usage, a single charge would last about 1.5 days. I have already tried the following troubleshooting steps without success: 1. Performed a fresh reset of the watch. 2. Reset my iPhone. 3. Disabled background app activity. 4. Enabled airplane mode and power saving mode. 5. Disabled Live Activities and Photo Memories Despite these measures, the issue persists. The battery health of my watch is at 90%, so I believe this is likely related to the software update. I am quite concerned about this situation. I have researched and noticed that similar battery drain problems were reported by beta testers of watchOS 11, and unfortunately, there appeared to be no clear resolution at that time. I rely on my Apple Watch daily, and I sincerely hope this can be addressed soon. I would appreciate your assistance in resolving this issue, as it is significantly affecting the usability of my Apple Watch. Thank you for your attention to this matter.

Hi All, I searched for this feedback but didn't see it, so apologies if this has been covered by another thread. Exploring the new camera app, It doesn't seem to recognize that external storage has been connected, so the additional features that allow ProRes high frame rates will throw an error dialog stating that "to use this you need external storage" even when external storage is connected. Using the Files app, the phone recognizes the storage, and this is something I can do with this external storage device on the previous version of IOS. It is clear that this release of the camera has been rewritten significantly since the last version. Is it possible that this is an oversight, a bug, or just functionality that has not been completed? Interested if anybody else is seeing this, or if it is just my setup.

Hey there, Just writing here to say how I do enjoy the latest update, but I can’t seem to run it on my iPhone 14 Pro well because it tends to overheat. i can deal with the stuttering issues and app crashes, that’s understandable, but for some reason the hardware seem to really heat up after normal use (scrolling on social media platforms). oh also, I do think rolling back your phone‘s software should be a simpler process as well. It’s not impossible, but the demand of a computer in reinstating a previous backup when iCloud backups your device through WiFi seems like a missed opportunity. Okay. Thank you for reading.

Connect the Zigbee color temperature light bridge to the Home app through the Matter Bridge (a device with a screen), and adjust the color temperature of the light on the screen. However, the color temperature of the corresponding device on the Home app is not synchronized, as shown in the following figure What information is missing from the Home app when my device reports color temperature during control?

Hey everyone, I've got a feature suggestion for iOS that I believe would significantly benefit users by optimizing battery life and data usage through more intelligent Wi-Fi prioritization. While iOS already favors Wi-Fi over cellular when available (due to its lower power consumption), there's room to enhance this behavior with more granular user control. My proposal is to introduce an explicit option: "Prioritize Wi-Fi for Energy Saving." How It Could Work Global Toggle (Settings > Wi-Fi or Settings > Battery): A simple switch that makes the iPhone more "aggressive" in maintaining a Wi-Fi connection. When active, it would reduce the likelihood of switching to cellular data during minor Wi-Fi signal fluctuations. This ensures the device stays on the more energy-efficient Wi-Fi network for longer periods, even if cellular signal is strong. This could also subtly influence Wi-Fi Assist, making it less eager to use cellular when Wi-Fi is slightly weak but still usable, prioritizing energy savings. Per-Network Option (Settings > Wi-Fi > [Network Name] > "i" icon): Adding an option like "Prioritize This Network for Energy Saving" within individual Wi-Fi network settings. This would be perfect for trusted networks like home or work, where users want to ensure maximum battery life. The iPhone would then make an extra effort to remain connected to that specific Wi-Fi network. Integration with Low Power Mode: For seamless optimization, this feature could automatically be enabled or its behavior enhanced when Low Power Mode is active, aligning perfectly with the goal of battery conservation. Key Benefits Extended Battery Life: By consistently favoring the more energy-efficient Wi-Fi radio, we minimize cellular power draw. Reduced Cellular Data Use: Helps prevent accidental or unnecessary shifts to cellular data, saving precious megabytes. Greater User Control: Gives users who prioritize battery longevity and data limits a direct tool to fine-tune their device's network behavior. This feature would be a valuable enhancement to iOS, offering users more control and a genuinely optimized experience.

Dear Apple: After upgrading to version 26 of the iPhone, when broadcasting using the local name, the iPhone 15 Pro Max was truncated to iPhone 15 Pro Ma with a type of 08 (shortened), but the overall length of the broadcast did not exceed 31 bytes

System: OS: macOS 15.5 CPU: (10) arm64 Apple M1 Pro Memory: 82.02 MB / 16.00 GB Shell: 5.9 - /bin/zsh` IDEs: Xcode: 16.1/16B40 - /usr/bin/xcodebuild Managers: CocoaPods: 1.15.2 - /Users/liuxiwei/.rvm/gems/ruby-3.3.5/bin/pod SDKs: iOS SDK: Platforms: DriverKit 24.1, iOS 18.1, macOS 15.1, tvOS 18.1, visionOS 2.1, watchOS 11.1 Android SDK: Not Found i use react-native to build ios app . when archive than it happens: ld: Assertion failed: (it != _dylibToOrdinal.end()), function dylibToOrdinal, file OutputFile.cpp, line 5184.

Mail sidebar stays

Dear Apple: If a BLE advertisement carries both a 16-bit service UUIDs and a 128-bit service UUIDs along with a local name, the local name will be placed in the scan response, then when the advertisement is turned off, both the 16-bit and 128-bit service UUIDs disappear while the local name persists. Subsequently, when transmitting a new advertisement that includes the 16-bit service UUIDs and local name, the resulting advertisement contains two local names. What methods can be used to avoid having two local names appearing simultaneously?Thanks

Hi Everybody knows about how this kind of files works. My issue is about trying to load data from these files to a HTML page. Everything works, I can read and use this data on my project however the records I have in Numbers, text where there are commas for punctuation, will be separated when this file is loaded. The comma is breaking the records, I know this is a CSV file but is there a way to set semicolon as delimiter on Mac or Numbers to be able to use the comma in my records without any issue? Also could be another symbol, but definitely I need the commas. thank you!

Hello all, We are in the process of deploying EAP-TLS Wi-Fi authentication across our corporate environment for both Windows and macOS devices. All endpoints are managed via Workspace ONE. As part of our macOS configuration, we are pushing device certificates to the login keychain of managed MacBooks. For testing purposes, we have explicitly set the Access Control List (ACL) of the associated private key to allow all applications access. This includes: eapolclient, which handles the EAP-TLS handshake for Wi-Fi panGPS, which is responsible for establishing the GlobalProtect VPN connection (we are using certificate-based authentication with pre-logon enabled) Additionally, we have configured and deployed a Wi-Fi profile via Workspace ONE to prevent users from having to manually select their device certificate - basically the identity preference card in Keychain Access. Despite these settings, we are still encountering Keychain Access prompts when eapolclient attempts to access the private key. This happens even though the key is configured to allow all applications access. This behavior is unexpected, and we’re trying to understand why these prompts persist. Has anyone encountered similar behavior on macOS, or is there something we're missing in terms of permissions or keychain configuration that could be causing this? We would greatly appreciate any insight or guidance. Thank you, Kyo

Good day. Friends, please help. I installed iOS 26 Betta version. During the update, there was a power surge and the Internet went out. The download was difficult but it went through. Now I can't check for updates. Write connection error and checking for updates. I can't roll back to 18.5. It gives an error through the computer. Please help. Thank you in advance.

Please expedite to Solve this bug , my Singpass is unable to launch in iOS 26. I believe this is more urgent than a new pride theme wallpaper 🏳️‍🌈

I'm working on an iOS/iPadOS app and need to determine programmatically whether the device is a Shared iPad as configured through Apple School Manager (ASM). Shared iPads allow multiple users to sign in with Managed Apple IDs and are typically used in educational environments. I want to identify this configuration at runtime within my app. I’ve looked into UIDevice, NSProcessInfo, and MDM-related APIs but haven't found a reliable way to detect whether the current device is a Shared iPad. Is there an API or method to check if the current iPad is configured as a Shared iPad (via ASM)? Any guidance or code examples would be appreciated.

Hi everyone, I updated my iPhone 16 Pro to iOS 26 beta and my Apple Watch to watchOS 26 beta because I wanted to test out the new features. After a few days of testing, I found the iOS 26 beta too unstable and laggy for daily use, so I downgraded my iPhone back to iOS 18.5 stable. Now my Apple Watch is still running watchOS 26 beta. I tried resetting it to factory settings, hoping that would help, but now I can’t pair it back to my iPhone because it requires iOS 26 again — which I don’t want to reinstall and don't want to use it till it's stable. Is there any way to downgrade my Apple Watch back to a stable version or somehow pair it again with my iPhone running iOS 18.5? Thanks in advance for any help!

How long was it between putting your first app on the App Store (that had a paid component to it like IAPs) and getting your first sale? I'm working on an app at the moment that I plan on putting up for a small one time fee. I'm curious to know what people's different experiences were with this. What was your app and how did it go?

On recent versions of macOS (including current betas), when enabling Internet Sharing from Ethernet to Wi-Fi, the configured WPA2/WPA3 password is ignored and the shared network is broadcast as an open (unsecured) network. Steps to Reproduce: Connect Mac to Ethernet via USB/LAN adapter Go to System Settings > General > Sharing > Internet Sharing Set up Wi-Fi options with a valid WPA2/WPA3 password Enable Internet Sharing Expected Behavior: Devices should see a password-protected Wi-Fi network with a lock icon and require authentication. Actual Behavior: The network appears unsecured (no lock icon) Devices like iPhone connect without entering a password This can be verified immediately from iOS Wi-Fi settings Additional Notes: Reproducible across macOS 15.5 RC and 16.0,26.0 Developer Beta Feedback has been submitted via Feedback Assistant multiple times This is a serious security risk if used in public or shared environments Has anyone else experienced this? Any known workarounds besides terminal-level defaults or Plist edits? Thanks in advance!