We have developed a live iOS application, built using Swift and UIKit, that enables users to connect via Bluetooth to an EV charging box. Once connected, users can start and stop the charging process directly from the app. The app also requires an active internet connection initially, as it uses server-side functionality to select and authorize the charging box. However, we recently discovered an issue affecting users on iPhone 14 and iPhone 15 models, specifically when the device enters Satellite mode (Emergency SOS via Satellite) — i.e., when there is no mobile data or Wi-Fi. In this mode, the system Satellite screen is triggered and Bluetooth stops functioning, preventing our app from connecting to the EV box. Users are unable to proceed, even though the app would still be usable via Bluetooth once the box is selected. We have already declared required Bluetooth background modes (bluetooth-central, bluetooth-peripheral) in Info.plist, and the app functions perfectly outside of this scenario. However, the behavior in Satellite mode appears to either disable Bluetooth entirely or restrict access from third-party apps. We’d like to know Is this the expected default behavior on iOS in Satellite mode? Is there any entitlement or exception available to allow Bluetooth access in such emergency scenarios (especially for critical utilities like EV charging)? Can an app like ours be made visible under the Satellite settings, or request access under this mode? This is a concern for users in remote or basement locations where mobile data is unavailable, and they rely solely on Bluetooth to charge their vehicles. Please advise if there is a workaround or planned support in future iOS versions. Thank you.

Hi i had problem after upgrade to ios 26. I try connected to my xiaomi earbud bluetooh, all functioning well (watch movie, listen song) except when on call, the bluetooth cannot function at all. Only able speak on phone or loud speaker. Already try do setting at Audio & Visual > Call Audio Routing > Bluetooth Headset. Anyone facing the same issue?

I opened a terminal window this morning and couldn't cd to /home. When I type a tilde, I get a paragraph symbol. Yesterday, my external keyboard could type a Pipe symbol, no such luck today. I ended up having to use hidutil to remap my keyboard and run keystrokes through terminal to restore what worked yesterday. When I look at the available English keyboards, they're all showing a paragraph symbol above the Tab key. Has anyone else run into this sudden keyboard change?

Since 17.4 Dev Beta 2, I have been having Bluetooth issues. I had hoped it would have cleared up but even in 17.4.1 it continues. Airpod and Echo Auto are the only 2 audio devices I have. The audio will become chopping, rubber band or sound robotic and sometime completely disconnect. While driving it will occur on both audio devices. Sometimes I'm stopped at red light and the issue occurs. The phone is less than 3 feet from the device at all times. I have read forums and removed and readded the devices but that did not help. I really do not want to have to reset my phone since my 2FA apps do not recover in a restore. Anyone have any suggestions?

The battery drains quickly on iPhone SE 3. Whenever I take it off the charger it drains from 100% to 80% in 20 minutes. Please fix this bug?

Hello, I recently installed the macOS 26 beta version on my MacBook Air M3, and I've encountered an issue where edited Word files are failing to save. I’ve tried restarting my laptop and checking for updates, but the problem persists. Has anyone else experienced this issue? Is there a specific setting I might have missed or any troubleshooting steps you recommend? Thank you for your assistance!

Our company is developing an MFi headset with a button that we would like to use for initiating PTT. We can detect the button press and initiate PTT successfully, even when the app is not in the foreground, using the ExternalAccessory framework. But I wonder if this is a coincidence, or a scenario that should reliably work with Push to Talk?

We have an application that is built for communication for emergency first responders. Our app streams video from emergency responder mobile devices to other responders, however, when the app moves into the background, or the screen locks, the stream is terminated. Is there a way to allow the stream to persist.

我在Core Bluetooth中发现了连接数量相关的错误码：CBError.Code.connectionLimitReached。 但是并没有找到最大连接数量相关的定义。请问在哪里可以找到最大连接数量相关的定义？

Hello. I have a problem with update check ! Say “ error to Check update” update section on my iPhone 16 pro. what Is the solution to fix?

I updated my iPhone to 26 and I just went to to to see if my iPhone was up to date I went and see but a came across this

when I go to software and update it says can’t check for updateS.

Hey, I need to know how to use texture mapping for rendering a spectrogram in metal. As I need smoothens the spectrogram. In my current project I am using vertex based approach which results in blocky behaviour between each quad. I need to smooth across each qaud so that It will smoothly gradient over.

I’m encountering an unexpected issue while using NEHotspotConfigurationManager.shared.apply(...) to connect to a Wi-Fi network. Specifically, I’m receiving a userDenied error, even though the user did not interact with any system prompt. Here’s a version of the code I’m using: let config = NEHotspotConfiguration(ssid: ssid, passphrase: passphrase, isWEP: false) // config.joinOnce = true NEHotspotConfigurationManager.shared.apply(config) { error in if let err = error { let nsErr = err as NSError mlog("err.code:\(nsErr.code)") if nsErr.code == NEHotspotConfigurationError.alreadyAssociated.rawValue { self.findWiFiListAndConnect(ssid, passphrase, overtimeSec, timeStart) } else { self.cmdDelegateQueue.async { self.delegate?.wifiClose(nsErr.code) } } } } The error returned is: wifiClose status: 7 Which corresponds to NEHotspotConfigurationError.userDenied. According to the official Apple documentation, this error should only occur when the user explicitly cancels the system dialog. However, in my case: • No system dialog appears. • The user does nothing, yet the error is still returned. • This issue does not happen every time, but it has been observed across multiple devices. Additional info: • iOS version: 18.5 • Device model: iPhone • joinOnce is not set (defaults to false) • Existing configuration is removed using removeConfiguration(...) before applying Is it possible that under certain system states (e.g. backgrounded, network restrictions, or app permissions), iOS silently fails without showing the prompt? Has anyone else encountered this issue, or does anyone know what could cause this behavior? Any help is greatly appreciated!

I want to get Cover-Art Image over Bluetooth. From the SDP Discover iPhoneSE, it support Cover-Art Feature. I connect and config OBEX Channel with L2CAP ERTM, it is successful. I send connect_request the OBEX Connect, the iPhone always no any response, and l2cap s-frame response from iPhone always failed. From the Apple Developer, it need Apple Authentication Chip. Is it still necessary now? Are there any other ways to obtain album pictures?

I need to implement an app that exchanges data with peripherals through TypeC on Apple 15 phones, but I have two questions that I need to ask for help: Which library is used to communicate with peripherals through the TypeC port of the Apple mobile phone? Do peripherals need to pass MFi authentication before they can communicate with the App?

Hello. I am building a BLE device that is Activity Fitness based and would like a "System Level" BLE connection on WatchOS using an ESP32 (I have built a test of this on the firmware side). Meaning I do not want my iOS app to pass the BLE connection to the WatchOS app. It seems like these App Level connections do not get as many background updates as a System Level connection, and also requires the WatchOS app to be launched to connect to the BLE device The System Level BLE connection (WatchOS Settings > BLE > Health Devices) allows for auto connection in the background, and gets more reliable background communication between the BLE device and the Apple Watch On the Apple MFi Page it only mentions iOS: From Apple MFi Page: :: Who does NOT need to join - Developers and manufacturers of accessories that connect to an Apple device using only Bluetooth Low Energy, Core Bluetooth, or standard Bluetooth profiles supported by iOS Does this apply to WatchOS as well? So, if I am making an BLE device that is Activity Based, and has one of the allowable Health Device UUIDs, is the BLE System Connection allowed using any BLE chip? Including say an ESP32 I have built a test BLE firmware that is a Health Device UUID, and the WatchOS sees it as a health device Is this fine then? No need for MFi application and also no need to worry about which BLE chip is used? thanks

How to remove Matter accessory connection artefacts? This appears after connecting and then removing a Matter test accessory. Please see attached screenshot:

We are developing a matter device. How can we display our own APP under the Home device information?

I have an accessory with MFi authenticaiton passed(got 0xAA05) and identification accepted (got 0x1D02). But when I try to open the target stream by using iAP2 EA session framework, I always enounter the same error looking like: XPC connection error: Error Domain=NSCocoaErrorDomain Code=4099 "The connection to service named com.apple.accessories.externalaccessory-server was invalidated from this process." UserInfo={NSDebugDescription=The connection to service named com.apple.accessories.externalaccessory-server was invalidated from this process.} anybody can tell me what it related with? And what can I do to go through it quickly? Thank you much in advance.